Renovating Ozone Machine Treat Shrimp Breeding Water

Customer information:

• Customer name: Vinh Thinh Biology Standard Technology Joint-Stock Company
• Address: Lot 23 Tan Tao Street, Tan Tao Industrial Park, Tan Binh District, Ho Chi Minh City
• Product: Dr.Ozone D100S Industrial ozone machine
• Quantity: 01 machine
• Requirements: Renovate the 100g ozone machine with D100s industrial ozone generator- breeding water treatment for shrimp hatchery

Introduction to VinhThinh Biostadt

Vinh Thinh Biology Standard Technology Joint-Stock Company (Referred to as VinhThinh Biostadt) located at Lot 23 Tan Tao Street, Tan Tao Industrial Park, Tan Binh District, Ho Chi Minh City, is a leading company in Vietnam that operates in the field of manufacturing and trading drugs, chemicals, biological products for aquaculture, and is also a producer and supplier of shrimp seed.

Vinh Thinh Biostadt hired Dr.Ozone to repair & upgrade the Ozone machine with a capacity of 100g/hr.

Vinh Thinh Biostadt used ozone applications to remove dissolved organic wastes, prevent pathogens in the recirculating shrimp hatchery system (RAS) – (Additional model of installation of ozone application in treatment aquaculture water).

In fact, the company owned and used an Ozone machine with a capacity of 100g/hr a few years ago. Our technicians inspected the current state of this machine. The result showed that this ozone machine is known by no brand, has a popular design, all internal components are damaged, no longer working, the handwork oxygen supply unit. The conclusion is that the machine is almost completely damaged, cannot replace components.

Dr.Ozone carry out replacing old ozone equipment with D100S industrial ozone generator

Old ozone generator used by the customer	Dr.Ozone® D100S industrial ozone generator
·         Handwork oxygen supply unit (including compressor pump and filter column only, no drying device), does not provide the required output concentration, has a short service life, is prone to moisture penetration.	·         The Dr.Ozone ozone generator uses a standard oxygen supply unit (full air compressor, moisture separator, remove impurity, etc.), high concentration of over 92% in conditions at 20 degrees Celsius and humidity of 70%, working life of oxygen concentrator up to 10,000h
·         Large ozone chamber. The high-voltage kit and the launch chamber are manufactured manually, consuming much electrical energy, and becoming unstable when used for a long time.	·         Compact Ozone launch chamber, absolute anti-oxidation stainless steel and Teflon materials. Using heat reduction technology, optimized chamber temperature regulation, providing 30% higher efficiency than the launch tube version on the market, nearly 90% higher compared to the old ozone tube.

Product specifications – Made By HSVN Global

1. The 100g Dr.Ozone generator made by HSVN GLOBAL

– Ozone capacity: 100g/hour

– Ozone concentration: 85 g/m3

– Ozone chamber is cooled by water 5l/p

(Load with Oxygen gas 20 l/min. Concentration >90%)

– Ozone launch tube dimensions 170x180x750mm

– Inverter power board dimensions 205x125x105mm

– High-pressure clump dimensions 140x150x170mm

– Power supply : AC 220v/50Hz 1000W

2. PSA Type Oxygen Generator

– Oxygen capacity: 20 L/min

– Oxygen concentration > 90%

– Weight: ~ 55 kg

– Power source: AC 220V 50Hz 850 VA

Installation process

Dr.Ozone technicians bring all replacement parts, tools to polish old machine surfaces, go to the construction site to conduct the upgrade and renovation. The total time of dismantling the old machine, renovating and upgrading is 5 hours.

With the satisfaction of customers about our products, cooperation with goodwill at the first cooperation between the two parties, Dr.Ozone continues to become the construction unit of a complete ozone generator system for the second facility of Vinh Thinh Biology Standard Technology Joint-Stock Company.

Based on the actual needs of every project and treatment system, we will provide an appropriate solution. Contact us today for the shrimp breeding water treatment solution, optimize cost. Our technical team who are professional, experienced and knowledgeable will always ready to listen and answer all your questions. You can contact us any time via Chat Box or:

Dr.Ozone Headquarter

Address: No.30, Truong An IC, An Khanh Commune, Hoai Duc Dist, Ha Noi city, Viet Nam

Hotline 24/7 Customer Service: (+84) 0901.856.888

Website: dr-ozone.com