VietSkymen VS-80A Ultrasonic Cleaner, 22L

Skymen VS-80A ultrasonic cleaner with a capacity of 22L, is equipped with a temperature and time control panel and a smart, sharp display screen. Helps you easily turn on/off, adjust the temperature and time simply and easily, suitable for the type of utensils that need to be cleaned. With such advantages, VS-80A promises to bring the best experience to customers.

Clean machine components with VietSkymen VS-80A ultrasonic cleaner

Machine components are an important and indispensable part of equipment and machinery, contributing to ensuring that the machine operates more smoothly and efficiently. In fact, they are basic electronic parts, connected together by soldering to the circuit board to form a complete circuit board.

Therefore, they are quite small in size and very difficult to clean thoroughly. VietSkymen VS-80A ultrasonic cleaner is a perfect solution, helping to clean all components from small to large. Thanks to ultrasonic technology and applying their principles in water or cleaning solutions for components without taking much effort, time or cost.

The machine operates based on a system of probes designed to be hidden at the bottom of the tank. When the power source is connected and the machine is turned on, the probes will emit ultrasonic waves in the water and will form vibrations, gradually forming air bubbles. When they have friction with each other, they will create smaller, thicker bubbles. When broken, they will create a relatively strong energy source, sweeping deep into every corner of the objects in the sink. Therefore, components or microcircuits with many corners, difficult to clean by conventional methods, can all be cleaned by the VietSkymen VS-80A ultrasonic cleaning machine.

Instructions for using VietSkymen VS-80A ultrasonic cleaning machine

To operate the VietSkymen VS-80A ultrasonic cleaning tank, customers need to perform the following steps:

Step 1:  After you receive the product, open the machine, shake it gently to determine if the internal parts are loose. At the same time, place the machine on a flat surface before pouring water into the sink.

Step 2:  Add an appropriate amount of cleaning solution (specialized cleaning powder, dishwashing liquid, etc.) as required to make the cleaning process easier and save more time. If heat is needed during the cleaning process, the liquid level in the tank of the VietSkymen VS-80A ultrasonic cleaner must not be lower than 2/3 of the tank depth.

Step 3:  Connect the power plug (included with the product). Please make sure to connect it to a power source with a voltage of 220V.

Step 4:  Adjust the washing temperature (if you wash items that do not require hot water, you can skip this step):

On the VS-80A control screen, on the left side are the buttons that help you control the temperature. To increase, please press TEMP+ , to decrease, please press  TEMP- , with each press the temperature will increase/decrease  1 degree Celsius  . After setting the temperature, press the  ON/OFF  button and the heating part will operate.

Step 5: Adjust the time of the VS-80A ultrasonic cleaner

On the control panel, the 3 buttons on the right are the time control buttons. After turning on the power (ON/OFF button), the control screen will display “0500” , indicating that the default setting time is 5 minutes 00 seconds . To increase, please press  TEMP+ , to decrease the time, please press  TEMP- . Each time you press, the time will increase/decrease by 1 minute.

After setting the time, press the  ON/OFF  button to start the ultrasonic cleaner operating and the digital timer counts down.

In addition, the ultrasonic cleaner also has the function of remembering the time that the user sets on the machine. So after the timer expires, when the machine is turned on, it will continue to operate according to the previously set time.

Step 6:  After completing the washing process, please turn off the machine (press ON/OFF) and unplug the power cord. At the same time, wait for the cleaning solution to cool down, then clean the tank thoroughly, drain all the water by opening the drain valve.