VietSkymen VS-300ST Industrial Ultrasonic Cleaner, 99L

Vietskymen introduces to you the VS-300ST industrial ultrasonic cleaning tank with a large capacity of 99 liters, which is an ideal solution for deep cleaning of tools and parts in many industrial fields. With machine dimensions of 780mm x 680mm x 850mm and tank dimensions of 550mm x 450mm x 400mm, this device not only provides ample space to process many items at the same time but also ensures high performance in each cleaning cycle. The VS-300ST cleaning tank is an excellent choice for factories, workshops, and maintenance facilities where an efficient, reliable, and easy-to-use cleaning solution is needed.

Instructions for use

To use the VS-300ST ultrasonic cleaning tank, customers perform the following steps:

Step 1 : Add water to the tank. The minimum water capacity required is 2/3 of the tank capacity and the object must be submerged in water.

Step 2 : Add the appropriate amount of dishwashing liquid/cleaning solution to the sink

Step 3:  Turn on the power switch and set the temperature, warm water helps increase cleaning efficiency

Step 4 : Place the items to be cleaned in the tank and set the washing time. The time may vary depending on the nature of the stain and the amount of items to be cleaned. However, each wash should not exceed 30 minutes.

Step 5 : After the machine stops running, wait until the water temperature drops, take out the utensils and rinse them thoroughly with tap water.

Great choice for businesses that need to clean components and items

The VS-300ST 99L industrial ultrasonic cleaning tank offers many outstanding advantages, making it a great choice for businesses that need to clean components and items effectively and quickly:

• Large Capacity: With a capacity of up to 99 liters, the VS-300ST wash tank allows cleaning of large quantities of components at once, saving time and improving production efficiency. This is especially useful in industrial environments where fast cleaning times are important.
• Adjustable Ultrasonic Power: The ultrasonic power can be adjusted from 0 to 1500W, allowing users to customize the cleaning level to suit each type of material and level of dirt. This not only ensures effective cleaning but also protects components from damage due to over-treatment.
• Adjustable temperature and time: The ability to reach temperatures of up to 80 degrees Celsius along with a heat output of 3000W helps remove stubborn dirt such as grease and other deposits. Users can also set the time from 0 to 99 minutes, allowing them to optimize the cleaning cycle for each type of item.
• Durable material: Using 304 stainless steel not only helps the tank resist corrosion and rust but also increases the durability of the equipment, ensuring it can operate for a long time in harsh industrial environments.
• Diverse ultrasonic frequencies: There are two frequency options of 28KHz or 40KHz, allowing users to choose the frequency suitable to the characteristics of the materials to be cleaned, thereby increasing cleaning efficiency without damaging sensitive components.
• Safe and easy to use: The design of the VS-300ST ultrasonic cleaning tank is simple and easy to operate, minimizing risks during use and maintenance.

Thanks to these advantages, the VS-300ST 99L industrial ultrasonic cleaning tank becomes the ideal choice for businesses that need an effective and reliable cleaning solution for components and items.

Things to note when using VS-300ST ultrasonic cleaning tank

1. Place the machine on a flat surface, in a safe location that is not prone to subsidence, near a power source and a water source.
2. Adjust the balance of the machine, do not tilt it as it will affect the operation and life of the machine.
3. Use the correct voltage of 220V.
4. The ground wire must be grounded to ensure safety during use.
5. Water pipes are carefully connected to ensure no water leakage.

Application of VS-300ST 99L industrial ultrasonic cleaning tank in the processing of electronic components

VS-300ST 99L industrial ultrasonic cleaning tank is very effective in processing and cleaning electronic components. This is a popular method in the electronics industry due to its ability to quickly and effectively remove dirt, fat, grease, oxide layers, and other deposits without damaging the components.

Ultrasonic cleaning works on the principle of ultrasonic waves creating millions of tiny bubbles in the cleaning solution. These bubbles quickly collapse, creating a powerful impact force, removing dirt without harming electronic components. This makes it an ideal tool for cleaning sensitive electronic components without manual scrubbing that can cause damage.

• Cleaning printed circuit boards (PCBs): Removes dirt, grease, and other residue from the circuit board after manufacturing or repair. This improves the performance and reliability of the circuit board.
• Cleaning SMD and BGA Components : Components such as SMD (Surface-Mounted Devices) and BGA (Ball Grid Array) can be effectively cleaned to remove old thermal paste, oil, and other impurities without damaging them.
• Prepare components before assembly: Clean components before assembly to ensure that no impurities will hinder the assembly process or affect the quality of the finished product.
• Cleaning components after testing and inspection: Removing contaminants and excess chemicals from the testing process is important to ensure components operate in optimal condition.
• Maintenance and repair: Cleaning components during maintenance and repair of electronic equipment helps to detect errors and perform repairs more accurately.
• Cleaning and Recycling Components: Ultrasonic baths can be used to clean components from old equipment, allowing them to be reused or recycled more efficiently.

The use of ultrasonic cleaning tanks in the electronics industry not only increases cleaning efficiency but also ensures the safety of components, thereby extending the life and improving the performance of electronic devices.