VietSkymen VS-1108ST Industrial Ultrasonic Cleaner, 540L

Discover the ultimate cleaning power with the VietSkymen VS-1108ST 540L Industrial Ultrasonic Cleaner! Designed to take on the challenge of cleaning large industrial components, this model boasts an impressive capacity of up to 540 liters, along with a spacious tank size of 1000x900x600mm, ensuring enough space to handle all your needs.

Device structure

Ultrasonic cleaning device VS-1108ST uses 108 ultrasonic wave generators, total capacity 54000W, uses three-phase current 380V 50HZ & supports solution heating, allowing to adjust the highest washing water temperature up to 85 degrees C.

Instructions for use

To use the VS-300ST ultrasonic cleaning tank, customers perform the following steps:

Step 1 : Add water to the tank. The minimum water capacity required is 2/3 of the tank capacity and the object must be submerged in water.

Step 2 : Add the appropriate amount of dishwashing liquid/cleaning solution to the sink

Step 3:  Turn on the power switch and set the temperature, warm water helps increase cleaning efficiency

Step 4 : Place the items to be cleaned in the tank and set the washing time. The time may vary depending on the nature of the stain and the amount of items to be cleaned. However, each wash should not exceed 30 minutes.

Step 5 : After the machine stops running, wait until the water temperature drops, take out the utensils and rinse them thoroughly with tap water.

Working principle

The VietSkymen VS-1108ST 540L ultrasonic cleaning tank operates on the ultrasonic wave mechanism, serving for deep cleaning in many industries. This device is equipped with transmitters at the bottom or sides of the tank, converting electrical energy into high-frequency sound waves. When ultrasonic waves spread in the cleaning solution, they create millions of tiny air bubbles through a process called “cavitation”.

The process of “cavitation” is at the heart of ultrasonic cleaning technology. During this process, air bubbles generated by ultrasonic waves continuously form and collapse in the solution, creating powerful impulses. This force is strong enough to separate dirt, grease, and sediment from the surface of the material without damaging the material itself.

In addition to the transmitters, the tank is also equipped with a heating system, allowing users to adjust the temperature up to 80°C. The combination of high temperature and ultrasonic waves softens stubborn dirt, thereby improving cleaning efficiency. Users can also set the cleaning time from 0 to 99 minutes, depending on the nature and dirtiness of the material.

At the beginning of the cleaning process, the materials to be cleaned are placed in the tank, then the tank is filled with water or a suitable solution. After the cleaning process is completed, the materials will be removed, rinsed with water and dried if necessary. The VietSkymen VS-1108ST 540L ultrasonic cleaning tank therefore provides an effective cleaning solution, saving time and effort in the maintenance and cleaning of industrial equipment.

Typical applications of VietSkymen VS-1108ST 540L ultrasonic cleaning tank in industries

VietSkymen VS-1108ST 540L ultrasonic cleaning tank with large capacity and powerful features, is widely used in many different industries to meet the needs of intensive cleaning. Below are some typical applications of this device in industries:

1. Automotive and Aerospace : Ultrasonic cleaners are used to clean engine parts such as pistons, gears, fuel injectors, and other components. Removing grease, dirt, and other deposits from these parts is extremely important to maintain their performance and prolong their life.
2. Manufacturing Industry : Ultrasonic cleaning tanks are used to clean metal components after machining, including removing excess substances such as burrs, lubricants and other contaminants accumulated during the machining process.
3. Electronics Industry : In the electronics industry, ultrasonic cleaning tanks are useful in cleaning circuit boards, electronic components such as chips, resistors and other components. This helps to remove contaminants that can cause faults or short circuits.
4. Medical Industry : This equipment is especially important in cleaning and sterilizing surgical instruments, medical devices and other accessories. Ultrasonic cleaning ensures that these instruments are thoroughly cleaned, removing all bacteria and contaminants, meeting strict hygiene and safety standards.
5. Food processing industry : Ultrasonic cleaning tanks are also used to clean parts of machinery and equipment in the food processing industry, helping to remove organic compounds, bacteria and other impurities, ensuring food hygiene and safety.
6. Science and laboratory : In laboratories, ultrasonic cleaning tanks are used to clean laboratory equipment, especially complex equipment that needs to be thoroughly cleaned before and after each experiment.

Thanks to its versatility and high efficiency, the VietSkymen VS-1108ST 540L ultrasonic cleaning tank is the ideal cleaning solution for many industries, helping businesses save time and costs in the process of maintaining and cleaning equipment.

Things to note when using VS-1108ST ultrasonic cleaning tank

1. Place the machine on a flat surface, in a safe location that is not prone to subsidence, near a power source and a water source.
2. Adjust the balance of the machine, do not tilt it as it will affect the operation and life of the machine.
3. Use the correct voltage rating of 380V.
4. The ground wire must be grounded to ensure safety during use.
5. Water pipes are carefully connected to ensure no water leakage.